LED Panel Light Installation

LED panel light

LED panel light is a high-end indoor lighting fixture. Its outer frame is made of aluminum alloy by anodizing. The light source is LED. beautiful feeling.

The LED panel light has a unique design. The light passes through the high transmittance light guide plate to form a uniform plane luminous effect. The illumination uniformity is good, the light is soft, comfortable and bright, which can effectively relieve eye fatigue. The LED panel light is also radiation-proof and will not irritate the skin of pregnant women, the elderly, and children.

LED Panel Light Installation
LED Panel Light Installation

LED panel light application range

LED panel lights are widely used, and there is a trend to replace grille lights; LED panel lights are mainly used in:

  1. Ceiling (replacing the original grille lights);
  2. Walls (not only for lighting purposes, but also for artistic expression);
  3. Installation body (pursuing the combination of practicality and art, convenient and simple installation);
  4. Others (can also be used in other places, such as train boxes or large mobile cars, counters, etc.).

LED panel light installation

  1. Embedded installation method

It is suitable for the installation of integrated ceiling. This installation method is generally used in offices, shops, kitchens and bathrooms, etc. It is also the most common installation method; first remove a ceiling, put the driver of the LED panel light on the ceiling next to it, and then After the power cord is connected, the panel light can be put on, and the installation method is relatively simple.

  1. Hoisting installation method

It is suitable for the installation of individual decoration. Hang the lighting on the ceiling with hanging wires. First fix the 4 hanging wire bases on the lighting to the roof, then connect the 4 hanging wires to the LED panel light, connect the driving power cable of the light, and pull It is good to adjust the height of the panel light by steel wire, and the installation method is more flexible.

  1. Concealed (inlaid) installation method

This installation method is a relatively traditional installation method, suitable for simple decoration occasions. First draw the inner edge of the LED panel light frame, then cut it with a knife, install the light frame, connect the light drive power cord, and finally Place the LED panel light, inlay the light and fix it.

  1. Surface-mounted (inlaid) installation

This installation method is similar to the above concealed installation method, except that the outer frame of the LED light is inlaid on the outside of the ceiling (protruding from the ceiling plane); the frame of the LED panel light is fixed on the ceiling, and then the LED driving power is connected. line, and then press the panel light firmly on the fixed frame.